Home/Boards and Circuits/Arduino MKR WiFi 1010 for IOT Projects

Arduino MKR WiFi 1010 for IOT Projects

BD22

Only 1 left in stock (can be backordered)

  • MKR 1010 simplifies the prototyping of WiFi-based IoT applications, easily connected and configured to other Arduino products. You do not need to be a network expert!
  • The hybrid WiFi / BLE connectivity module has a low power consumption mode, improving the life of your batteries.
  • Ideal for: Entry point to and professional IoT, building wireless sensor networks in minutes, remotely operated devices.
  • Cloud features: the board can connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. It is also possible to connect your board to different Cloud services, including Arduino IoT cloud!
  • Simply to power with a USB cable or external Li-Po 3.7V battery. Recharge the battery through the USB port.

Only 1 left in stock (can be backordered)

Description

The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, orif you want to create a Bluetooth® Low Energy device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

 

The Arduino MKR WiFi 1010 is based on the SAMD21 microcontroller.

MICROCONTROLLER SAMD21 Cortex®-M0+ 32bit low power ARM® MCU (datasheet)
RADIO MODULE u-blox NINA-W102 (datasheet)
BOARD POWER SUPPLY (USB/VIN) 5V
SECURE ELEMENT ATECC508 (datasheet)
SUPPORTED BATTERY Li-Po Single Cell, 3.7V, 1024mAh Minimum
CIRCUIT OPERATING VOLTAGE 3.3V
DIGITAL I/O PINS 8
PWM PINS 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
UART 1
SPI 1
I2C 1
ANALOG INPUT PINS 7 (ADC 8/10/12 bit)
ANALOG OUTPUT PINS 1 (DAC 10 bit)
EXTERNAL INTERRUPTS 10 (0, 1, 4, 5, 6, 7, 8,9, 16 / A1, 17 / A2)
DC CURRENT PER I/O PIN 7 mA
CPU FLASH MEMORY 256 KB (internal)
SRAM 32 KB
EEPROM no
CLOCK SPEED 32.768 kHz (RTC), 48 MHz
LED_BUILTIN 6
USB Full-Speed USB Device and embedded Host
LENGTH 61.5 mm
WIDTH 25 mm
WEIGHT 32 gr.

Additional information

RAM

1GB, 2GB, 4GB, 8GB

Reviews

There are no reviews yet.

Be the first to review “Arduino MKR WiFi 1010 for IOT Projects”
Go to Top